MF - Engine Kits - MF with Perkins A4-236
Eng. Kits - MF with Perkins A4-236
For: M.F. Tractors with Perkins A4-236 engines

Now available with a NEW CRANKSHAFT for little more than a basic regrind for most applications
3 KIT LEVELS
"EK" - FOR IN-FRAME REPAIR. Includes - Pistons, Gudgeon Bushes, Piston Rings, Liners, Con Rod Bearings, Con Rod Lock Nuts (where fitted), Top & Bottom Gasket Sets.

"EKM" - FOR OUT OF FRAME REBUILD. Includes ALL of the above PLUS - Main Bearings (you specify under-size required at NO EXTRA COST), Thrust Washers, Front & Rear Seals.

"EKMC" - same as EKM but INCLUDING A NEW CRANKSHAFT
IMPORTANT
To reduce your Inventory levels, Bare-Co lists VALVE TRAIN KITS separately below the Engine Kit Part Numbers. Valve Train Kits will fit a range of different engine kits.
The Bare-Co QUALITY DIFFERENCE
Semi-finished liners are a no-charge option for most models.
Viton Rear Seals are supplied for most applications
No extra for under-size bearings
The EKMC Kit allows for INSTANT ASSEMBLY with a NEW CRANKSHAFT and Standard Bearings straight out of the box.
APPLICATION
ENGINE
KIT
PIST/ LINER
(1 CYL.)
RING SET
(1 CYL.)
PISTON
LINER
FINISHED
LINER SEMI
FINISH
A4-236 engine
MF168, 175
ROPE TYPE REAR SEAL
SHORT PISTON
ie. up to eng. 236UA103063
98.476mm bore
EK16
EKM16
EKMC16
Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7
B2147
B2620
=41158041
B6147
=82878
COMP. HT.
=69.92
length
=120.65

B7543
31358441
31358394

[Flanged liner]


O.D. =103mm
B7547
31358324
31358393

A4-236 engine
MF168, 175
 LIP TYPE REAR SEAL
SHORT PISTON
from eng.236UA103064L to eng. No. 236UA109214L
MF174, 184 LANDINI up 236UA110047L, 98.476mm bore

EK16
EKM16
EKMC1610

Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7

A4-236 engine
LONG PISTON
MF168, 175 from 109215L
MF174, 184 from UA110047L
265, 274, 275, 565, 575
675, 3050
98.476mm bore

EK49
EKM49
EKMC49
Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7
B367
B7551
=68301
743110M91
Comp. ht.
=70.84mm
Length
=121.1
A4-236 engine
HEAVY WALL CYLINDER
MF365, MF375
98.476mm bore
Identify by:
liner O.D.=104.292mm
EK47
EKM47
EKMC47
Valve Train Kits:
STD = VK6
0.003" O/Size
= VK7
B368
B7545
=3135X032
3637332M1
Flanged liner with large O.D. 104mm
To suit A4-248 type eng. block
B7546
=3135X031
3637331M1
flanged liner
Eng. Kits - MF with Perkins A4-236
NOTE: Parts shown are BARE-Co parts - original part numbers are shown for reference only.